The Ceph Blog

Ceph blog stories provide high-level spotlights on our customers all over the world

  • July 9, 2013
    v0.66 released

    Our last development release before dumpling is here! The main improvements here are with monitor performance and OSD pg log rewrites to speed up peeering. In other news, the dumpling feature freeze is upon us. The next month we will be focusing entirely on stabilization and testing. There will be a release candidate out in a week or […]

  • July 9, 2013
    Ceph Cuttlefish VS Bobtail Part 1: Introduction and RADOS Bench

    Contents Introduction System Setup Test Setup 4KB Results 128KB Results 4MB Results Conclusion INTRODUCTION Hello readers! You probably thought you had finally gotten rid of me after the strict radio silence I’ve been keeping since the last performance tuning article. No such luck I’m afraid! In reality we here at Inktank have been busy busy […]

  • July 8, 2013
    XenServer Support for RBD

    Ceph has been enjoying tremendous success in the Openstack and Cloudstack communities, and a large part of this is due to the ease of using the Ceph block device (RBD) with the KVM or the open-source Xen hypervisor . This was achieved through patches that were made by Josh Durgin, an Inktank engineer, to Qemu […]

  • June 25, 2013
    v0.65 released

    Our next development release v0.65 is out, with a few big changes.  First and foremost, this release includes a complete revamp of the architecture for the command line interface in order to lay the groundwork for our ongoing REST management API work.  The ‘ceph’ command line tool is now a thin python wrapper around librados. […]

  • June 20, 2013
    v0.61.4 released

    We have resolved a number of issues that v0.61.x Cuttlefish users have been hitting and have prepared another point release, v0.61.4.  This release fixes a rare data corruption during power cycle when using the XFS file system, a few monitor sync problems, several issues with ceph-disk and ceph-deploy on RHEL/CentOS, and a problem with OSD […]

  • June 12, 2013
    v0.64 released

    A new development release of Ceph is out. Notable changes include: osd: monitor both front and back interfaces osd: verify both front and back network are working before rejoining cluster osd: fix memory/network inefficiency during deep scrub osd: fix incorrect mark-down of osds mon: fix start fork behavior mon: fix election timeout mon: better trim/compaction […]

  • June 11, 2013
    New Ceph Backend to Lower Disk Requirements

    I get a fair number of questions on the current Ceph blueprints, especially those coming from the community. Loic Dachary, one of the owners of the Erasure Encoding blueprint, has done a great job taking a look at some of issues at hand. When evaluating Ceph to run a new storage service, the replication factor […]

  • June 6, 2013
    v0.61.3 released

    This is a much-anticipated point release for the v0.61 Cuttlefish stable series.  It resolves a number of issues, primarily with monitor stability and leveldb trimming.  All v0.61.x uses are encouraged to upgrade. Upgrading from bobtail: There is one known problem with mon upgrades from bobtail.  If the ceph-mon conversion on startup is aborted or fails […]

  • May 29, 2013
    v0.63 released

    Another sprint, and v0.63 is here.  This release features librbd improvements, mon fixes, osd robustness, and packaging fixes. Notable features in this release include: librbd: parallelize delete, rollback, flatten, copy, resize librbd: ability to read from local replicas osd: resurrect partially deleted PGs osd: prioritize recovery for degraded PGs osd: fix internal heartbeart timeouts when scrubbing very […]

  • May 23, 2013
    State of the union: Ceph and Citrix

    Since last month saw huge amounts of OpenStack news coming out of the Developer Summit in Portland, I thought it might be worth spending some time on CloudStack and its ecosystem this month. With the Citrix Synergy event in full swing, a ‘State of the Union’ with respect to Ceph and Citrix is probably the […]

  • May 16, 2013
    Deploying Ceph with ceph-deploy

    If you have deployed Ceph recently without the assistance of an orchestration tool like Chef or Juju you may have noticed there has been a lot of attention on ceph-deploy. Ceph-deploy is the new stand-alone way to deploy Ceph (replacing mkcephfs) that relies only on ssh, sudo, and some Python to get the job done. […]

  • May 14, 2013
    v0.62 released

    This is the first release after cuttlefish. Since most of this window was spent on stabilization, there isn’t a lot of new stuff here aside from cleanups and fixes (most of which are backported to v0.61). v0.63 is due out in 2 weeks and will have more goodness. mon: fix validation of mds ids from CLI commands […]

Careers